Network and App Configuration:
Device Binding: After powering on, press and hold the reset button, scan the QR code on the device to bind to the app, and check the network status ("4G Online") and signal strength.
Parameter Settings: Select night vision mode (full color/infrared), adjust detection sensitivity, set the patrol path, and alarm push notifications via the app.
Storage Test: Format the storage media, set motion detection + loop coverage mode, and simulate obstruction or hand gestures to test the recording trigger function.
Maintenance and Care:
Cleaning Frequency: Clean the solar panel surface monthly to ensure charging efficiency.
Regular Inspection: Check the battery voltage (≥11.5V) and bracket stability quarterly, and confirm the device's operating status after extreme weather.
Data Management: Select a data plan based on usage frequency. If watching for one hour per day, the monthly data requirement is approximately 8GB. You can apply for a data SIM card from a mobile carrier.